36
and RP1000 have equal levels) to RP Mix 0% (all that is heard is the USB playback in the outputs,
no RP1000 processing).
To change the USB Setup options, follow these steps
From the preset name display, press the 1. Edit Down button once to enter Edit mode. The
Wah row’s LED will be lit.
Turn 2. Knob 4 to adjust the USB Playback Mix.
Turn 3. Knob 5 to adjust the USB Record Level.
Changes made to the USB parameters are saved automatically and will affect the global perfor-
mance of the RP1000 and all of its presets. Audio recorded via USB in the RP1000 is always
tapped off of the audio feeding the XLR outputs.
To Next Page
Loading...
