Need help?Do you have a question about the DigiTech HardWire RV-7 and is the answer not in the manual?
General| Type | Reverb Pedal |
|---|---|
| Analog/Digital | Digital |
| Input Impedance | 1 MΩ |
| Output Impedance | 1 kΩ |
| Current Draw | 100 mA |
| Bypass | True Bypass |
| Weight | 1.5 lbs |
| Reverb Types | Room, Hall, Plate, Spring |
| Controls | Decay |
| Modes | Bypass |
| Inputs | 1 x 1/4" Instrument |
| Outputs | 1/4" Output |
| Power Supply | 9V DC |
Safety instructions and important warnings for product usage and disposal.
Controls the reverb level.
Connection point for the power supply.
Controls high-frequency response in the reverb signal.
Controls the length of time the reverb fades out.
Selects one of 7 Lexicon® reverb types.
Connects instrument/pedal output; enables battery power.
Connects a second input for stereo operation.
Spring-loaded hinges holding the foot switch in place.
Indicates when the effect is on; dims when battery is low.
Turns the effect on and off.
Connects to a single guitar amplifier or effects return.
Connects to a second guitar amplifier.
Instructions for attaching the pedalboard pad.
Instructions for applying the glow sticker to the foot switch.
Instructions for attaching and removing the StompLock accessory.
To Next Page
