Need help?Do you have a question about the DigiTech DSP 16 and is the answer not in the manual?
General| Brand | DigiTech |
|---|---|
| Model | DSP 16 |
| Category | Recording Equipment |
| Language | English |
Mount the DSP 16 in a rack or use rubber feet for free-standing use.
Route the power cord away from audio lines to prevent interference.
Connect audio cables to the rear input and output jacks.
Connect an optional footswitch to the rear panel Footswitch jack.
Set mixer/instrument/amplifier to loudest operation and adjust DSP-16 Input Level until Clip LED occasionally lights.
Set the DSP-16 Output Level to the desired volume.
Use the Program Select Dial to select any program from 1 through 128.
Adjust the Effect Mix to achieve the desired dry to wet output mix.
The unit is automatically on as soon as it is plugged into power.
Includes Program Number display and Program Select Dial for selecting programs, bypass, and MIDI channels.
Features Bass, Mid, and Treble shelving and bandpass filters for sound tailoring.
Controls for Effect Mix, Output Level, and Input Level for signal flow and mix adjustment.
Describes mono/stereo 1/4-inch jacks for instrument, line signals, and amplifier/mixer outputs.
Details connection for footswitch control and MIDI IN for program change messages.
Explains various methods for connecting the DSP 16 in stereo or mono effects loops.
Outlines mono-in/mono-out, mono-in/stereo-out, stereo-in/stereo-out, and stereo-in/mono-out configurations.
Procedures for setting input and output levels for optimal performance and unity gain.
Tips for achieving the best sound performance with minimum noise.
Details footswitch setup, including FS-300 and momentary footswitch usage.
Explains how to select program numbers and MIDI channels via MIDI.
Lists common symptoms and their probable solutions for operational issues.
Details presets simulating various room sizes and larger music halls with different decay times.
Describes presets with defined decay lengths and reversed reverb swells.
Covers environmental reverb simulations and delay programs up to 100ms.
Details delay programs up to 1 second and tempo-synced delays.
Explains multi-tap delays, combined effects presets, and bypass function.
Lists Room Reverb presets with size, pre-delay, and reverb time details.
Details Hall Reverb presets including room size, pre-delay, and reverb time.
Provides decay time for Gated Reverb presets.
Lists reverb time for Reverse Reverb presets.
Lists program names for Special Reverb presets.
Details delay time and feedback for presets up to 100ms.
Lists delay time and feedback for presets up to 1 second.
Lists BPM for Tempo Delay presets.
Provides descriptions for Multi-tap Delay presets.
Details delay time and room size for multi-effects presets.
Lists delay time and room size for combined delay/hall reverb presets.
Describes the Bypass preset which bypasses all effects.
Details technical specifications including effects, presets, processor, S/N ratio, bandwidth, and THD.
Outlines the terms and conditions of the product warranty.
To Next Page
