Need help?Do you have a question about the DigiTech DIGIVERB and is the answer not in the manual?
Power| power supply | 9V Alkaline Dry Battery |
|---|---|
| power consumption | 4.8 Watts |
| optional power supply | PS200R - 100 (100V ~ 50/60Hz), PS200R - 120 (120V ~ 60Hz), PS200R - 230 (230V ~ 50Hz), PS200R - 240 (240V ~ 50Hz) |
Battery| battery life | Approximately 4 hours |
|---|---|
| power supply | 9V Alkaline Dry Battery |
| optional power supply | PS200R - 100 (100V ~ 50/60Hz), PS200R - 120 (120V ~ 60Hz), PS200R - 230 (230V ~ 50Hz), PS200R - 240 (240V ~ 50Hz) |
Ports & interfaces| jacks | Input, Out 1 (Mono), Out 2 |
|---|---|
| input impedance | 1 MOhms |
| output impedance | 100 Ohms |
Weight and Dimensions| dimensions | 4 15/16”(L) x 3 1/8”(W) x 2 1/8”(H) |
|---|---|
| weight | 1.38 lbs |
Critical safety instructions for operating the DigiVerb pedal to prevent hazards.
Details the limited warranty, return authorization, and exclusions for the product.
Explains the function of the Level knob (output level) and EQ knob (high frequency adjust).
Describes the Decay knob, Type knob, and the AC adapter connection.
Details connecting the instrument to the input jack and its effect on battery power.
Explains pedal release pins, on/off operation, and the indicator LED status.
Describes the Out 1 (Mono) and Out 2 jacks for single amp or stereo output.
Guides users on connecting for stereo operation or using with a mixer's effects loop.
Explains the CIT cabinet modeling feature for amp simulation.
Instructions on how to enable the CIT cabinet modeling feature each time power is applied.
Step-by-step instructions for replacing the 9V battery in the DigiVerb pedal.
Lists the controls (Level, EQ, Decay, Type) and jacks (Input, Out 1, Out 2).
Details power supply, consumption, battery life, and input/output impedance.
Provides physical dimensions, weight, and optional power supply models.
To Next Page