Need help?Do you have a question about the DigiTech TSR24S and is the answer not in the manual?
General| Type | Multi-effects Processor |
|---|---|
| MIDI | In/Out/Thru |
| Frequency Response | 20Hz - 20kHz |
| A/D Resolution | 16-bit |
| D/A Resolution | 16-bit |
| Sampling Rate | 44.1kHz |
| Effects | Reverb, Delay, Chorus, Flange, Pitch Shift, EQ |
| Inputs | 2 x 1/4" (L/R) |
| Outputs | 2 x 1/4" (L/R) |
| Dynamic Range | 90dB |
| Power Supply | 9 VAC (External Transformer) |
Essential safety guidelines for operating the equipment.
Warning regarding the lithium battery and its proper handling.
Guidance on power supply, surge protection, and grounding.
Detailed explanation of all buttons, LEDs, display, and controls on the front panel.
Description of all input, output, MIDI, and power connectors located on the rear panel.
Explanation of various ways to connect the TSR-24S for different audio routing needs.
How Programs and Algorithms are structured and interact within the unit.
Step-by-step guide on how to tweak and alter existing factory programs.
Essential steps for building a new program from scratch.
How to choose and assign algorithms to programs for desired effects.
How to save modified programs to memory and copy them to other locations.
A four-step process for creating new custom algorithms.
Step-by-step guide to adding effects modules into an algorithm.
Procedures for deleting individual modules or all modules from an algorithm.
Connecting module inputs and outputs to create signal flow within algorithms.
How to save newly created or modified algorithms to memory.
Instructions for assigning functions to the footswitch switches.
How to access and use the built-in chromatic tuner.
Setting the MIDI channel for receiving MIDI data on the TSR-24S.
Assigning MIDI CCs to control program parameters for expressive control.
To Next Page
