2. Press “ ” MENU key, select positive film/
negative film / B & W film according to film types
you have put into the film holders. (detailed
instruction is on Page10)
3. According to display on the screen,press “
”key to mirror image to adjust the angle of
films(detailed instruction is on Page8);
Press“
”/ “ ” key to adjust the brightness of
films.
4. press “
” key and wait for 2 seconds,the
images will automatically save into the SD card.
5. Press“
” key to enter into playback mode,
press“
”key again to exit the playback mode.
（Note：“5M(10M)” on the top left corner of the
screen indicates Resolution, the number at the top
right corner indicates that how many images can
the SD card save.)
9 - EN
To Next Page
Loading...
