Digitus professional DN-82110

To Next Page

Gigabit Fiber Ethernet Converter

10/100/1000Base-T/TX to 1000Base-SX/LX

User’s Manual

Overview

Gigabit fiber media converter is a 10/100/1000 auto negotiating media converter. The copper port

auto negotiates the connected device’s speed and duplex mode: 10/100/1000Mbps half duplex;

or 10/100/1000 Mbps full duplex; the fiber port always operates at 1000Mbps. The maximum

distance is Multi-mode 0.5 or 2km and single-mode 10/20/40/60/80km or 160km.

There is also 10/100/1000Base-T to SFP (mini-GBIC) media converter available. The SFP slot

supports both Multi-Mode (SX) and Single-Mode (LX) fiber standards for transmission distances

of up to 80km. Gigabit Ethernet port Auto-Negotiate between 100 and 1000Mbps transmission

speeds. Note: DN-82131 support 1000Base-T only.

Need help?

Do you have a question about the Digitus professional DN-82110 and is the answer not in the manual?

Summary

Details about the CAT5 twisted-pair interface for the converter.

Describes duplex mode fiber interfaces (TX/RX) and cross-connection.

Explains connecting network devices to the converter via twisted-pair and fiber.

General