5
2)
For the device without Bluetooth function: After power
on, the
[
]
button flashes. Plug Wireless USB Receiver into
the device which in the package. The device will connect
DA-12221 automatically.
3)
To disconnect the Bluetooth device, hold down the
[
]
button for 4 seconds.
Note: DA-12221 can connect up to two Bluetooth devices.
9. Disconnect the Bluetooth
1) Open your mobile phone and click DA-12221 in the
connected device to disconnect.
2) Hold down the
[
]
button for 2 seconds to disconnect the
Bluetooth, the
[
]
button will flash white.
10. AUX Mode
Insert the 3.5mm audio cable in package into the audio jack,
plug another head into your device, use the device to which
you have connected the speaker to control the music being
played. To control the volume of the speaker, you can press
【+【【-【button increase and decrease the volume.
Note: AUX mode cannot be used for hands-free calls.
11. True Wireless Connection
Two identical DA-12221 speaker can be connected to each
other via the TWS function, you can connect them together and
enjoy true wireless stereo.
1) Disconnect the Bluetooth connection on the mobile phone
or device, and make sure that the speaker is not connected
to any device (also remove the audio cable on the AUX IN
jack).
2) Choose one of them as the master (another one as the
slave) First, press the
[ ]
button of the master, and then
To Next Page
Loading...