4
5. Technical details and radio emission
6. Charging
We recommend that you fully charge the DA-12221 before
using it for the first time to maximize battery life. It takes about
2-3 hours to fully charge. An acoustic signal will indicate a low
battery. To charge the speaker battery, it is recommended DC
5V/1A or higher current charger for charging. The Charging
progress is signaled by a flashing LED below the
[
]
button;
when the battery is fully charged, the LED will stay lit. During
charging, the speaker can be used for calls and music playback.
7. Power ON/OFF
To turn the speaker on or off, press and hold the [ ] button
for 2 seconds. Note: To save the power, the speaker turns
off after 20 minutes of inactivity.
8. Connecting to Bluetooth
1)
Connect DA-12221 with Bluetooth-enabled devices: After
power on, the [
] button flashes. Turn on the Bluetooth
function of the mobile phone and select DA-12221 in the
list of available devices After selecting the device, it will
automatically connect. The [
] button stops flashing after
connected, then you can play music or make a hands-
free call.
To Next Page
Loading...