5
6. Installation
Windows XP/7/8/10/11, Mac9.1 or above
1. Turn your computer on and wait until the
system has finished booting
2. Connect the USB plug to your computer
3. Connect the USB plugs on the peripheral
devices (Printer, scanner...etc.) to the USB
hub and switch on/off the connected
device
FAQ
Can l use the USB hub without power adapter
connected?
Yes, the USB host port on PC can supply up to
900mA power to the hub, you don’t have to plug
power adapter if only lower power or external
powered USB devices connected to the HUB, such
as keyboard, mouse, USB Stick, card reader,
printer or 3.5 USB hard drive with external power
Can I use this hub for charging?
This hub is designed as a data hub, you can
charge low power device such as Bluetooth
headset, mobile phone, but do not charge
tablets and other devices that require a higher
power input
To Next Page
Loading...
