EasyManua.ls Logo

Digitus DA-70861 - Operation Guide

Digitus DA-70861
5 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
5. OPERATION
1) Connect the USB-C male port of this product to your USB-C notebook/ultrabook
2) Connect the three USB3.0 ports to three USB devices
3) Connect the Mini DisplayPort port of the Docking to display with Mini DisplayPort
port with one Mini DisplayPort cable
4) Connect the HDMI port to HD display with one HDMI Cable
5) Connect the VGA port to HD display with one VGA Cable
6) Connect Gigabit Ethernet port of this product to Ethernet Router with an
Ethernet cable
7) Connect the Stereo port to earphone
8) Insert Micro SD and SD/MMC cards into the card reader ports
9) Connect the Type C charging port, it can charge your notebook/ultrabook and
support this adapter to work simultaneously
Note:
1. When connecting the USB-C male port of the adapter to Chromebook, the mouse to be
connected to the USB 3.0 port will not work immediately, it will have seconds’ delay.
This problem also occurs in other similar type-c adapter (including Apple original 3 in
1 Adapter) when connected to Chromebook.
2. When plugging in and out the PD Adapter, the connected USB devices will get
disconnected flashily and then reconnect in a few seconds, so to prevent possible data
loss or corruption, avoid disconnecting the PD Adapter from AC power while
transferring data
3. Three video ports can’t work simultaneously, the priority is HDMI=Mini DisplayPort >
VGA, when HDMI and Mini DisplayPort are connected at the same time, it is advised to
use one video port at one time to guarantee the normal work of this product

Related product manuals