1. Introduction
The DIGITUS® 2.5"/3.5" USB 3.0 Dual SATA HDD Docking
Station reads and writes 2.5" and 3.5" HDD SATA hard drives
simultaneously without the need for a PC or notebook. The
USB 3.0 technology enables data transfer, backups, and
conversions at transfer speeds of up to 5 Gbps. The DIGITUS
USB 3.0 Dual SATA HDD Docking Station is downward
compatible to USB 1.1, meaning that you can work with older
SATA hard drives with no problem. The clone function can
also be used to transfer data 1:1 to another hard drive. Start
the process at the touch of a button and follow the progress
using the LED display. The perfect solution for backups, data
archiving, and hard drive cloning.
Please read this manual carefully before using this device.
2. Features / Specifications
• Supports All 2.5 inch & 3.5 inch SATAI/II HDDs up to
1TB/4TB or more
• Standable Convenient and Trendy Design
• Support USB 3.0 super-speed (5Gbps)
• Complies with USB 2.0 high speed (480Mbps),
USB 1.1(12Mbps), USB 1.0 (1.5Mbps)
• Easy installation plug & play and hot-swappable
• LED progress indicator
• Supports One Touch Backup or Duplicate
• Functions as a stand alone HDD duplicator
To Next Page
Loading...
