2
1. Introduction
With this electrically height-adjustable table frame from DIGITUS® you can
easily convert your desk into an ergonomic sit / stand workstation. Save the
cost and hassle of finding a height-adjustable desktop and just use our
electrically adjustable upgrade kit. This model can be used for tabletops with
a length of 120-180 cm and 140-200 cm. Tabletop depths of 55 to 75 cm are
recommended. Using the control panel, you can save 4 height positions and
set them any time at the press of a button. The current height is shown on
the LED display. Integrated collision protection prevents collision with any
obstacles when raising or lowering the table.
2. Main Features
Maximum load capacity of up to 120 m
Flexibly adjustable frame: Cross strut (112 - 165 cm) x longitudinal strut
(130 - 180 cm)
Suitable for tabletops: 120 - 180 cm x 140 - 200 cm and a depth of
55 - 75 cm
The longitudinal strut (3rd leg) can be flexible installed on the left or right
Convenient, electrical height adjustment (without tabletop): 72 - 120 cm
Control panel for height adjustment with LED display (3 brightness
settings) and memory function for 4 height settings
Collision protection function (G-sensor) with 3 sensitivity levels - detection
of obstacles during upwards and downwards movement
Automatic stop system - stops the motor in case of resistance and
automatically moves the frame back slightly
3 motors for easy and quiet (< 55 dB) height adjustment - Lifting speed
25 mm/sec.
Stability is provided by the 3 pedestals (58.5 cm wide) with 2 footpads
each for fine-tuning to balance out any unevenness in the ground
3. Package Content
1x Electrically Height-Adjustable Table Frame
1x User Manual
To Next Page
Loading...
