To Next Page
E
emilycordovaSep 8, 2025
What to do if Digitus Control Panel displays E05?
- HHeather Barr DDSSep 8, 2025
If your Digitus Control Panel displays the error code E05 due to the collision avoidance system, release the button.
What to do if Digitus Control Panel displays E05?
If your Digitus Control Panel displays the error code E05 due to the collision avoidance system, release the button.
What to do if Digitus Control Panel shows E01 or E07?
If your Digitus Control Panel displays the error code E01 or E07, disconnect the power, wait for 30 seconds until the display stays off, and then reconnect the power.
What does it mean when Digitus Control Panel displays E06?
If your Digitus Control Panel displays error code E06, it indicates an electrical problem. Replace the control box to resolve this issue.
What does it mean when Digitus Control Panel displays E12 or E22?
If your Digitus Control Panel displays error code E12 or E22, it indicates an abnormal current. Replace the control box to resolve this issue.
What does it mean when Digitus Control Panel displays E42?
If your Digitus Control Panel displays error code E42, it indicates a memory function failure. Replace the control box to resolve this issue.
What does it mean when Digitus Control Panel displays E43?
If your Digitus Control Panel displays error code E43, it indicates a sensor failure of collision avoidance system. Replace the control box to resolve this issue.
What to do if Digitus Control Panel shows E14?
If your Digitus Control Panel displays the error code E14, which indicates that the hall wire is broken, check and then replace the motor cord (M1).
What to do if Digitus Control Panel shows E18 or E28?
If your Digitus Control Panel displays the error code E18 or E28, which indicates a weight overload, remove the items on the desktop.
What does it mean when Digitus Control Panel displays E16 or E26?
If your Digitus Control Panel displays error code E16 or E26, it indicates a motor failure, reset the system.
What to do if Digitus Control Panel shows E02?
If your Digitus Control Panel displays the error code E02 because of column height difference, reset the system.
General| Type | Monitor Desk Mount |
|---|---|
| Mounting | Desk mount |
| Number of supported displays | 1 |
| VESA Mount Compatible | Yes |
| VESA Interface Standard | 75 x 75 mm, 100 x 100 mm |
| Maximum weight | 8 kg |
| Rotation | 360° |
| Material | Aluminum, Steel |
| Color | Black |
| Weight Capacity | 8 kg |
| Maximum screen size | 32 inches |
| Tilt angle | +45° / -45° |
| Swivel angle | +90° / -90° |
| Compatibility | VESA 75x75 mm, VESA 100x100 mm |
| Product Type | Monitor Mount |
