To Next Page
T
traceyhallAug 21, 2025
What to do if Digitus Control Panel displays HOT?
- SSteven MolinaAug 21, 2025
If your Digitus Control Panel displays 'HOT', allow your desk to cool down and remain idle for approximately 18 minutes.
What to do if Digitus Control Panel displays HOT?
If your Digitus Control Panel displays 'HOT', allow your desk to cool down and remain idle for approximately 18 minutes.
What to do if Digitus Control Panel shows E02?
If your Digitus Control Panel displays the error code E02 because of column height difference, reset the system.
What to do if Digitus Control Panel shows E21?
If your Digitus Control Panel displays the error code E21, which indicates no connection, check the connection (M2).
What to do if Digitus Control Panel shows E11?
If your Digitus Control Panel displays the error code E11, which indicates no connection, check the connection (M1).
What to do if Digitus Control Panel shows E04?
If your Digitus Control Panel displays the error code E04, which indicates a digital controller connection error, check the connection and then reconnect the power.
What does it mean when Digitus Control Panel displays E43?
If your Digitus Control Panel displays error code E43, it indicates a sensor failure of collision avoidance system. Replace the control box to resolve this issue.
What does it mean when Digitus Control Panel displays E42?
If your Digitus Control Panel displays error code E42, it indicates a memory function failure. Replace the control box to resolve this issue.
What does it mean when Digitus Control Panel displays E12 or E22?
If your Digitus Control Panel displays error code E12 or E22, it indicates an abnormal current. Replace the control box to resolve this issue.
What does it mean when Digitus Control Panel displays E06?
If your Digitus Control Panel displays error code E06, it indicates an electrical problem. Replace the control box to resolve this issue.
What to do if Digitus Control Panel shows E01 or E07?
If your Digitus Control Panel displays the error code E01 or E07, disconnect the power, wait for 30 seconds until the display stays off, and then reconnect the power.
General| Type | Monitor Desk Mount |
|---|---|
| Mounting | Desk mount |
| Number of supported displays | 1 |
| VESA Mount Compatible | Yes |
| VESA Interface Standard | 75 x 75 mm, 100 x 100 mm |
| Maximum weight | 8 kg |
| Rotation | 360° |
| Material | Aluminum, Steel |
| Color | Black |
| Weight Capacity | 8 kg |
| Maximum screen size | 32 inches |
| Tilt angle | +45° / -45° |
| Swivel angle | +90° / -90° |
| Compatibility | VESA 75x75 mm, VESA 100x100 mm |
| Product Type | Monitor Mount |
