Need help?Do you have a question about the Digitus DN-13018 and is the answer not in the manual?
Comparative overview of the three Digitus MFP server models, detailing their features and differences.
Information on obtaining technical assistance and accessing product updates via the website.
List of items included in the product package, for verification upon receipt.
Description of the software and documentation provided on the product CD.
Details the external hardware components and status indicators of the MFP server.
Guides on how to install and integrate the MFP server into a network environment.
Highlights the key functionalities and advantages offered by the MFP server.
Step-by-step instructions for physically connecting the server and its peripherals.
Configuration steps for setting up a wireless network connection for the DN-13018 model.
Explains methods for assigning an IP address, including DHCP and manual configuration.
Outlines the default naming conventions for printers and storage devices connected via USB.
Summary of methods for adding network printers in Windows environments.
Guidance on connecting the MFP server to the network based on topology.
Instructions for installing the necessary printer driver on a Windows client PC.
Detailed steps for adding network printers using Windows tools and the Control Center.
Instructions for manually editing the /etc/hosts file for network name resolution.
Explains printing using the LPD protocol and relevant commands.
Steps for setting up the server on BSD UNIX and Linux systems.
Guide for configuring the server on RedHat Linux via its graphical interface.
Important notes and limitations regarding the file server functionality and supported formats.
Defines the naming structure for USB storage devices connected to the server.
Illustrates the network diagram for connecting USB storage devices to the server.
Discusses codepage configurations for file system compatibility and multilingual support.
Details how to securely share USB storage using SMB/CIFS and FTP protocols.
Introduces NetUSB technology for direct USB device connection over the network.
Explains the software-based connect and disconnect operations for USB devices.
Guides on remote installation and utilization of NetUSB for printers, scanners, and storage.
Lists the constraints and unsupported scenarios for NetUSB technology.
Step-by-step guide for installing the Control Center application on a computer.
Explains how to operate the Control Center's various tools for server management.
Describes the methods to properly close the Control Center application.
Introduces the web-based interface for server status display and configuration.
Guides on accessing and navigating the server's web interface for management.
Explains the status indicated by the server's LED lights and their behavior.
Provides instructions for configuring firewalls to enable proper communication with the MFP server.
Method to reset the server to its default factory settings via the Control Center.
Method to restore factory defaults through the server's web interface.
Physical reset procedure using the server's init button and power adapter.
A comprehensive list of the server's default configuration parameters.
Steps to upgrade the server's firmware using the Control Center software.
Steps to upgrade the server's firmware via its web interface.
Method for firmware upgrade using the init button and a TFTP client tool.
To Next Page
General
