⑨
. Use File Sharing
- File System: This product supports a file format of FAT12/16/32.
For NTFS, Digitus MFP server only supports read operation.
- Storage Access Mode: To use file sharing, please set the storage
access mode to “Server Mode”, either from web UI or control
Center.
- Naming Your Storages: The local drives of the two storages in
USB1 port and USB2 port are named as USBx_DyPz, where USBx
represents the USBx port, Dy represents the the y-th Disk and Pz
represents the z-th partition.
- Setting MFP Server Code Page: MFP Server supports Windows
code pages. If you want to communicate files with MFP server, you
have to set your MFP server codepage to be same as the codepage
that your Windows PC is using.
- Using SMB Method for Sharing Storages
1. Connect a USB storage device to this product.
2. Select My Network Places
3. Click Display the Computers of Workgroup
4. Double click Microsoft Windows Network icon.
5. Double click the Workgroup that MFP server belongs to. The
default Workgroup name is “WORKGROUP”. You can refer
to Digitus MFP Control Center or server’s web pages to get it.
You will see that the MFP server will be displayed as the
default server name or the server name that you set.
6. If you can not find Workgroup name of MFP server in
Microsoft Windows Network, you can select Search Computer
in My Network Places and type the server’s hostname or IP
address to find it.
7. Double click this server name icon. The folders will be
displayed as USB1_DyPz, and USB2_DyPz where Dy
represents the y-th disk and Pz represents the z-th partition
with respect to USB1 port and USB2 port.
8. If you clear Enable SMB/CIFS Print/File Server
Authentication in Supported Protocols, you login to the SMB
server without requiring authentication; otherwise you have to
type user name and password to login to the server. You can
add user name and password in User Account box by MFP
Control Center or server’s Web page.
7
To Next Page
Loading...
