Storage Access Mode
1. Server Mode: In this mode, you can access the USB storage via FTP or
SMB/CIFS protocols. FAT16/32 file format is fully supported in this
mode. For NTFS, however, only the “read” operation is supported. This
is the default mode.
2. NetUSB Mode: In this mode, you can access the USB storage using
NetUSB technology. FAT16/32 and NTFS file formats are supported,
but only one user is allowed to access the storage at the same time.
Please refer to chapter 9 for the details about NetUSB technology.
mode FAT16/32 NTFS Concurrency
Server Writable Read Only Multiuser
NetUSB Writable Writable Single User
User Accounts: You can change administrator name and password or add a
user account for SMB/CIFS Print/File server and FTP File server. If you forgot
administrator name and password, you must perform Restore Factory Default
action by plugging in the power adaptor while pressing the Init button. Please
refer to the chapter “Restore Factory Defaults”. Administrator owns the
Read-Write Permission for File servers.
Set Administrator
5 New Administrator: enter your desired administrator name.
5 New Password: enter your desired password.
67
To Next Page
Loading...
