5
Utility Installation for Windows
The installation procedure for the Powerline Configuration utility will vary depending on
which operating system you are using on your computer. The following procedure is for
installation under Windows XP. Installation on other operation system is similar.
1. Insert the CD into the CD-ROM drive to initiate the Autorun program.
Once completed, a menu screen will appear.
2. Click on the “Powerline Configuration Utility” hyperlink in 200M Powerline Adapter
field to start the installation. If the menu screen is not shown, you can start the installation
as follows.
• Click on Start Menu/ Run.
• Enter “E:\Utility\setup.exe” in the appeared box, where “E” is the letter of
your CD-ROM drive.
• Click on “OK” button.
3. The utility will be installed into your computer
and a new icon called “PowerPacket Utility”
will appear on your desktop.
This utility is only for Windows 2000, 2003, XP, and Vista.
Note
Further Configuration
If you want to configure more detail settings of the Powerline Adapter, please refer to user’s
manual on the bundled CD.
To Previous Page
Loading...