-24-
MAIL
Click “ ” (Miscellaneous Control) → “ ” (Server Setting) → “Network” → “MAIL” to go into the “MAIL”
page. Enter the detailed E-mail information and press “Apply” to confirm. The information you set here will be
applied when the function of E-mail notification is enabled in the "Trigger" menu.
Function Description
Server Enter the SMTP server address provided from your e-mail system supplier.
Mail From Enter the entire mail address to ensure E-mails will not be blocked by SMTP.
Verify Password Some mail servers are required to verify the password. Please enter the “user name” and
“password”.
Email Address Add the E-mail address(s) of the assigned recipient(s).
Note: Users can assign up to 4 mail accounts for E-mail notification.
Video
Click “ ” (Miscellaneous Control) → “ ” (Server Setting) → “Video” to go into the “Video” page.
Item Description
System Type Select the system type of the connected network camera.
MPEG Image Resolution: VGA (640 × 480) / QVGA (320 × 240)
Image Quality: BEST / HIGH / NORMAL / LOW
Stream Format Select the stream format of the network transmission (MPEG-4 / Motion JPEG).
Frame Rate The frame rate allowed to each viewer can be adjusted to adapt to the bandwidth on the
network. Set the desired image frequency to the maximum (FULL
To Next Page
Loading...
