10
Step5: In “Date and Time”, check if the date and time setting are correct and modify if
necessary.
Step6: In “Network”, select the network type based on your network environment (Static
IP / PPPoE / DHCP), and key in the information needed.
Note: This camera doesn’t support POE router or hub.
For Static IP:
a) Enter the information of “Server IP”, “Gateway” and “Net Mask” obtained from your ISP
(Internet Service Provider).
b) Enter the port number. The valid number ranges from 1 to 9999. The default value is 80.
Typically, the TCP port used by HTTP is 80. However in some cases, it is better to change
this port number for added flexibility or security.
For PPPOE:
a) Enter the user name and password obtained from your ISP.
b) Continue the DDNS setting as instructed in “3.2.2 DDNS Setting” when you’re prompted to
restart the web browser in Step8.
To Next Page
Loading...
Need help?
General
