Digitus DN-7039-B User Manual

DN-7039-B 108M Wireless Router User Guide
¾ AC power socket: only use the power adapter supplied with the DN-7039-B
108Mbps Wireless Router, use of a different adapter may result in product damage.
¾ Four 10/100Mbps RJ45 LAN ports for connecting the router to the local PCs
¾ RJ45 WAN port for connecting the router to a cable, DSL modem, or Ethernet
¾ Factory Default Reset button
¾ There are two ways to reset the router's factory defaults:
1) Use the Factory Defaults function on System Tools -> Factory Defaults page
in the router's Web-based Utility.
2) Use the Factory Default Reset button: First, turn off the router's power. Second,
press and hold the default reset button then turn on the router's power, until the
SYS LED lights up (about 3 seconds). Last, release the reset button and wait
for the router to reboot.
Note: Ensure the router is powered on before it restarts completely.
¾ Wireless antenna
Figure 2-2 Rear Panel sketch
- 5 -

Digitus DN-7039-B Specifications

General

Brand	Digitus
Model	DN-7039-B
Category	Network Router
Language	English