6
Front Panel
The front panel of the Switch, contains of 8 x
10/100Mbps RJ-45 ports
10/100 Mbps RJ-45 ports (1~8):
Designed to connect to the device with a bandwidth of 10Mbps,
100Mbps. Each has a corresponding Link/Act indicator.
Rear Panel
The rear panel of the Switch consists of one Grounding Terminal
and a 5V DC power adapter interface
Grounding Terminal:
Located on the left side of the rear panel, use wire grounding to
lightning protection.
DC Power Connector:
Located on the right side of the rear panel, power supply via
external power adapter, using 5V/550mA external power supply.
To Next Page
Loading...
Need help?
General
