9
Note
• Hot keys are not case-sensitive.
• Buzzer sounds when switching between PC1 and PC2.
1
“++” means to press 2 times in rapid succession. For example:
“Scroll Lock ++ Scroll Lock + 1” means to press the Scroll Lock
button twice in rapid succession and then press number “1”
button. The detection between each hotkey code times out for 5
seconds. For example, if the Scroll Lock button is pressed for the
first time, and then the Scroll Lock button is pressed after more
than 5 seconds, the hotkey combination is invalid.
2
“N” here indicates the number of the PC. For example, to switch to
PC2, the hotkey combination is “Scroll Lock ++ Scroll Lock + 2”.
3
Turn on this function, then HDMI, MIC and the speaker will enter
the automatic switching mode without USB. Press (except the
space bar) any key to exit to the port before the automatic
switching, press the space bar to stay at the currently switched
port. When switching automatically, the “Select” LED flashes at the
same time.
4
“N” here indicates the number of switching interval which can be
5(seconds) to 999 (seconds).
5
“1” means on, “0” means off.
6
This mode only has relation to the hotkey function of Number 4
and Number 6.
To Next Page
Loading...
Need help?
General
