Q3: Why the temperature and humidity values do
not change?
A1. Check if:
a. The device should be placed within the coverage
of the router signal. Make sure the distance between
the device and the router is lessthan 15m/49.2.
b. Please confirm that the device is in connecting
mode.(The indicator light of EZ mode flashes every
0.5 seconds.)
c. Please confirm that the WiFi network is 2.4Ghz, not
5Ghz.
d. Please check whether the battery is running low.
e. Please check whether the device is added in
gateway.
A2: Check if
a. Please check whether the device is online.
b. Please check whether the battery is running low.
c. There is no change in ambient temperature.
d. Make sure the distance between the device and
the phone is less than 15m/49.2.
Q1: Why do you need to enable location permission?
7
Warm Tips
2
1
The sensor should work in an environment
with a temperature ranging from -20~60℃
(-4~140℉) and humidity ranging from
0-100%RH.
Do not immerse the sensor in water and put it
in the refrigerator. The refrigerator or freezer
will block the signal.
3
The best range between the thermo-hygrome-
ter and wifi hub is within 49.2/15m in the
open area.
Der Sensor erkennt die Lutemperatur und
Lufeuchtigkeit durch die Löcher vorne und
unten, bitte decken Sie die Löcher nicht ab.
Bitte stellen Sie sicher, dass sich der WLAN-Hub
so nah wie möglich am Router befindet.
Bitte stellen Sie sicher, dass das Signal nicht
durch mehr Wände, Schmutz oder dicke
Stahlbarrieren läu.
Bitte tauschen Sie die Batterien aus, wenn die
Anzeige für niedrigen Batteriestand auf dem
Display erscheint.
01 02 03 04 05 06 07 08 09 10 11 12 13 14
15 16 17 18 19 20 21 22 23 24 25 26 27
28 29 30 31 32 33 34 35 36 37 38 39 40
41 42 43 44 45 46 47 48 49 50 51 52 53
54 55 56 57 58 59 60 61 62 63 64 65 66
To Next Page
Loading...
Need help?
General
