Q2.The Reasons for Failed Connection
Q3: Why the temperature and humidity values do
not change?
A1. Check if:
a. The device should be placed within the coverage
of the router signal. Make sure the distance between
the device and the router is lessthan 15m/49.2.
b. Please confirm that the device is in connecting
mode.(The indicator light of EZ mode flashes every
0.5 seconds.)
c. Please confirm that the WiFi network is 2.4Ghz, not
5Ghz.
d. Please check whether the battery is running low.
e. Please check whether the device is added in
gateway.
A2: Check if
a. Please check whether the device is online.
b. Please check whether the battery is running low.
c. There is no change in ambient temperature.
d. Make sure the distance between the device and
the phone is less than 15m/49.2.
Q1: Why do you need to enable location permission?
A3: If you don't enable the location permission on
your phone, the functions of Intelligent Linkage
can not work.
6
FQA
Q3: Warum ändern sich die Temperatur- und
Feuchtigkeitswerte nicht?
01 02 03 04 05 06 07 08 09 10 11 12 13 14
15 16 17 18 19 20 21 22 23 24 25 26 27
28 29 30 31 32 33 34 35 36 37 38 39 40
41 42 43 44 45 46 47 48 49 50 51 52 53
54 55 56 57 58 59 60 61 62 63 64 65 66
To Next Page
Loading...
Need help?
General
