Step 1: Plug the Wi-Fi Hub into an indoor outlet.
Step 2: Pull out the insulating piece to power up the
thermo-hygrometer.
Note: (The distance between the Wi-Fi Hub and the
thermo-hygrometer should not exceed 49.2/15m).
Please do not place the sensors where your
Bluetooth signal will be obstructed.
Pair the WiFi Hub
3
Step 1: Turn on the phone's bluetooth and WiFi.
Step 2: Long-press the button on the WiFi hub for
5-10s until the green lights flash to keep in pairing
mode.
Step 3: Click "Add device" or top right "+", select "
Gateway control">"Socket Gateway (BLE)"> to add
the WiFi Hub in app.
Step 4:
Waiting for connecting to be 100% completed.
Note: (Only Support 2.4Ghz WiFi)
01 02 03 04 05 06 07 08 09 10 11 12 13 14
15 16 17 18 19 20 21 22 23 24 25 26 27
28 29 30 31 32 33 34 35 36 37 38 39 40
41 42 43 44 45 46 47 48 49 50 51 52 53
54 55 56 57 58 59 60 61 62 63 64 65 66
To Next Page
Loading...
Need help?
General
