Helix Headphones
https://www.youtube.com/watch?v=K6QFzfSsKWc
1.4 SKAA Cmd App
An App called SKAA cmd is available for download for:
• Mac Computers
• Windows Computers
• Android Phones and other Android devices
• iOS devices such as iPhone, iPad Air, iPad mini etc.
The App “SKAA cmd” provides a convenient way to control many functions of
the SKAA operating system and is highly recommended.
For information on SKAA cmd visit : https://skaa.com/tlc/
There you will also find more guides such as:
• SKAA cmd User’s Guide
• SKAA Transmitter User’s Guide
• SKAA Receivers User’s Guide
• Troubleshooting
1.5 Battery Charging
The 2 x NiMH AAA batteries which powers the headphones are internal to the
product and are not normally accessible to the user.
Power Requirements:
5V @ 500 mA USB power source for charging.
Battery Status – An orange LED located on the Left Cup along the inner side
of the lower part of the red ring near the Bond Indicator.
This LED indicates as follows:(With no charge cable plugged in)
• Off – Batteries have a good charge somewhere between fully charged
to near Low Batt.
• Flashing Slow – Low Batt indication. Batteries should be charged
soon.
When Charge Cable is plugged in.
• Off – Batteries are Fully Charged (If charge cable is plugged in and
charging)
• On – Batteries are being charged.
Charge port Location:
To Next Page
Loading...