Do you have a question about the Dime CRY BABY FROM HELL and is the answer not in the manual?
Toggles effect on/bypass (green LED indicates on).
Controls amount of gain added by BOOST switch.
Controls the sharpness of the DB01's bandpass.
Shapes tone of toe-down position.
Increases output as set by the VOLUME knob (red LED).
Determines frequency center of WAH WAH.
Adjusts the torque/resistance of the rocker pedal.
Explains parallel vs. pass-through modes for outputs.
Details input and output impedance ratings.
Specifies frequency ranges for heel/toe down positions.
Covers noise floor, gain, boost range, current draw, and power supply.
| input impedance | 1 MΩ |
|---|---|
| output impedance | <1 kΩ |
| range 1 frequency | 440 Hz / 1.5 kHz to 2.2 kHz |
|---|---|
| range 2 frequency | 400 Hz / 1.3 kHz to 1.9 kHz |
| range 3 frequency | 375 Hz / 1.2 kHz to 1.8 kHz |
| range 4 frequency | 345 Hz / 1.0 kHz to 1.6 kHz |
| range 5 frequency | 295 Hz / 750 Hz to 1.4 kHz |
| range 6 frequency | 250 Hz / 1.2 kHz |
| noise floor | -102 dGV |
|---|---|
| current draw | 2.5 mA |
| power supply voltage | 9 volts DC |
| maximum gain at fc | 15 dBV |
|---|---|
| boost range | 0.1 to 17 dB |