35
2000 Owner’s Manual
HIGH LIMIT SENSOR
When “HIGH LIMIT SENSOR” is displayed on the LCD, the high limit
sensor is non-functional. Contact your local Authorized Dimension One
Spas dealer, or authorized service center.
TEMP SENSOR
When “TEMP SENSOR” is displayed on the LCD, the water tempera-
ture sensor is non-functional. Contact your local Authorized Dimension
One Spas dealer, or authorized service center.
COOLING
When “COOLING” and the water temperature are displayed on the
LCD, the water temperature has reached 2˚ above the set temperature.
The circulation pump and ozone generator will turn off to allow the
water to cool back to the set temperature. This is a normal spa function.
No corrective action is necessary.
N O T E : The circulation pump and ozone generator will be on while
either jet pump is on and they will remain on for 30 minutes after the
pump(s) turn off re g a rdless of the water temperature.
NOTE: The Dimension One Spas Scrolling Message Center will keep
all programming for 40 years with no power supply and the time of day
for 30 days. This battery back up will not provide power to heat or oper-
ate the spa.
To Next Page
Loading...
