Need help?Do you have a question about the Dimension One Spas 2000 Model and is the answer not in the manual?
Provides essential cautions for using the spa, including health risks and precautions for specific user groups like pregnant women or those with medical conditions.
Describes how the heater and circulation pumps operate in relation to the set spa temperature and system status.
Lists and explains the built-in safety features of the spa, such as flow sensors, shutdown timers, and freeze protection.
Provides detailed steps for the initial setup and operation of specific spa models like Aurora HP, Interlude, Arena, and Triad.
Details the function of the jets control pad for pump speed adjustment, activation, and automatic shut-off cycles.
Explains messages like OH, FL, PRR, HL, FLC, indicating spa status or errors.
Explains 'PRR' (Temperature Sensor), 'HL' (High Limit), and 'FLC' (Pressure Switch) messages and their causes.
Details the operation of the Jets control pads for pump activation, speed control, and automatic shut-off cycles.
Resets the spa to factory defaults and explains routine maintenance prompts like Rinse Filters and Clean Filters.
Explains 'OVERHEAT', 'LOW FLOW', and 'ICE CONDITION' messages, their causes, and required actions.
Explains 'HIGH LIMIT SENSOR' and 'TEMP SENSOR' errors, indicating non-functional components.
Outlines the steps for initial water chemistry setup, including adding chemicals and running the pump.
Provides a table listing common spa problems, their potential diagnoses, and recommended actions for resolution.
General| Brand | Dimension One Spas |
|---|---|
| Model | 2000 Model |
| Category | Hot Tub |
| Language | English |
To Next Page