Control Panel
1.
2. Please NOTE:
24 hours.
3. Press POWERPOWER button
again.
4.
To select the desired relative humidity press the UP/DOWN arrow buttons. Each
press will increase/decrease the desired room humidity by 5%. The room humidity
can be set between 35-80% or continuous, and will show on the display. The unit
5. Press the FAN SPEED button to select between High & Low speeds. The selected
speed indicator light will turn on.
6. To program the unit to automatically turn on, press the TIMER button, while the unit
is OFF. The timer can be set in 30 minute increments, up to 10 hours. After 10 hours,
each press of the button with increase the time in 1 hour increments up to 24 hours
7.
TIMER button, while the unit
is ON. The timer can be set in 30 minute increments, up to 10 hours. After 10 hours,
each press of the button with increase the time in 1 hour increments up to 24 hours
Operation
Buttons
Indicator
lights
Digital humidistat
display
8
To Next Page
Loading...
Need help?
General
