Dimplex Multi-function Remote Control - User Manual

Multi-function
Remote Control Guide
Standby
1. Turns unit on at all previous settings
2. Turns all unit functions off
Heat On/Off
1. Turns on the
Comfort$aver
TM
Heating System
2. Turns heat off
Temperature Down
Lowers the
thermostat set
temperature
Temperature Up
Increases the
thermostat set
temperature
Heat Boost
1. Turns on full-heat
for 5 minutes
2. 10 minutes
3. 15 minutes
4. 20 minutes
5. Turns boost off
Brightness/Flicker
1. Full brightness
2. Low brightness
3. Flickering full
brightness
4. Flickering low
brightness
Eco Mode
Automatically lowers
heat output to
achieve maximum
energy savings
Color Themes
1. Wood Fire
2. Gas Fire
3. Red
4. Blue
5. Prism (cycles
through colors)
6. Kaleidoscope
(simultaneously
cycles multiple
colors)
7. Personal (allows
customizable
user setting)
Flame On/Off
1. Turns the flame
effect on
2. Turns flame off
Sleep Timer
1. Turns timer on
for 30 minutes
2. Adjust duration
up to 8 hours
3. Cancel timer
See reverse for summary of demonstration mode

Summary

Remote Control Functions

Standby

Turns unit on at all previous settings or turns all unit functions off.

Flame On;Off

Turns the flame effect on or off.

Temperature Control

Lowers or increases the thermostat set temperature.

Eco Mode

Automatically lowers heat output for maximum energy savings.

Color Themes

Selects various visual color themes, including customizable settings.

Heat On;Off

Turns the ComfortSaver™ Heating System on or off.

Heat Boost

Activates full heat for a selected duration, or turns boost off.

Brightness;Flicker

Adjusts flame brightness and flicker effects to various levels.

Sleep Timer

Sets a timer for automatic unit shutdown, up to 8 hours.

Demonstration Mode

Initiating Demo Mode

How to start the demo mode by holding the remote to the sensor.

Demo Mode Operations

Describes the sequence of operations during demo mode, including heating and lighting themes.

Ending Demo Mode

How to confirm the end of the demo mode sequence.

Dimplex Multi-function Remote Control Specifications