Dimplex WPM 2007 plus - Page 56

E-18
English
6.1
6.2 Outputs
Depending on the system configuration, the “Outputs” Menu
shows the “OFF or ON” status display for the following outputs:

Display
 
At all times
 
2 Compressors
 
Cooling function
Air-to-water HP
 
 
At all times
  
Bivalent or mono energy
 
  
Bivalent
 
  
Bivalent
 
  
3. Heating circuit 3
 
  
3. Heating circuit 3
  
At all times
  
  
Cooling function
  
  
2. Heating circuit 2
 
  
2. Heating circuit 2 or
cooling operating with silent
cooling only with reversible HP
 
  
2. Heating circuit 2 or
cooling operating with silent
cooling only with reversible HP
 
At all times
 
Passive cooling function

 
Cooling function
 

Passive cooling function
 

Passive cooling function
  
Domestic hot water
 
Domestic hot water
Sensor
Immersion heater
  
Swimming pool