Need help?Do you have a question about the Dinamica Generale DG8000 and is the answer not in the manual?
Details the physical size and dimensions of the indicator unit in different housing options.
Illustrates the wiring and connection diagrams for the indicator and its accessories.
Displays information about the indicator's functioning, memory, and programs, not directly editable.
Details how to configure fundamental parameters essential for the weighing system's operation.
Provides a comprehensive list of all available passwords and their corresponding functions.
Step-by-step instructions for performing calibration using a known sample weight.
Describes the process of enabling user accounts and password protection for system access.
Instructions on how to adjust the display's contrast for better readability.
Guides the user on how to correctly set the system's date and time.
Step-by-step guide for performing manual weighing tasks.
Explains different weighing modes, including partial and total (net/gross) measurements.
Procedure for resetting stored refused feed data.
Steps to activate the scheduler feature for automatic program execution.
How to manage GPRS connection modes and scheduler settings directly from the indicator.
Steps to initiate the WiFi synchronization process with the DTM software.
Guide on enabling and configuring the J1939 communication protocol.
The first step in component testing, covering scale and sensor cable functionality.
Guidelines for the proper and eco-friendly disposal of the product.
Offers detailed contact information for technical support, including phone numbers and email addresses.
General| Accuracy | 0.03% of the applied load |
|---|---|
| Operating Temperature | -10°C to +50°C |
| Power Supply | 11-30 Vdc |
| Protection Rating | IP65 |
| Measurement Range | Configurable, depending on the connected load cells |
| Output Signal | 4-20mA, 0-10V, RS485 |
To Next Page
