Dinasaw T-REX - User Manual

T-REX
Automatic Chain Sharpener
INSTRUCTION MANUAL
Version 7.0

Summary

SAFETY PROCEDURES

Specifications and safety measures

LIMITED WARRANTY

LIMITATION OF LIABILITY

Check List

Installation

Wall; Bench Mounting

Details on mounting the machine to a wall or bench.

Cutter Terminology

Defines terms like Side Plate Angle and Top Plate Angle.

Assembling the Tri-Pod Stand (optional)

Instructions for assembling the optional tri-pod stand.

Bench Mounting the Machine (Brackets not supplied)

Guidance on securing the machine to a bench.

Overview of Operation

Adjustments

Lists four main adjustments needed for different chain sizes.

Limitations

Details constraints on sharpening certain chain types or configurations.

The Control Panel

Assembling the machine

Adjustments

Fitting the Grinding Wheel

Dressing and Truing the Grinding wheel

Fitting the Chain

Adjusting the chain clamp opening width

Steps to modify the clamp opening for different chain gauges.

Changing the Feed Motor Fuse

Procedure for replacing the fuse protecting the feed mechanism.

Adjusting the Feed Stroke and Pawl Height

OFF Mode Setup

AUTO Mode Setup

Magnet Positioning for Counting

Grinding the Cutters the same length

Adjusting the amount of material to remove

Changing the Side Plate Angle

Changing the Top Plate Angles

0 Degree Top Plate Angle

GRINDING the DEPTH GAUGES

Chains with Double Tie Links

Repaired Chains

Safety Chains

3;4 Harvester Chain

Checking the Cam Timing

Leaving the Machine for Extended Periods

Trouble Shooting

Things to watch out for

Electrical Circuit

Warranty Registration

Dinasaw T-REX Specifications

General

Brand	Dinasaw
Model	T-REX
Category	Power Tool
Language	English