To Next PageTo Next Page
Need help?Do you have a question about the Dinex DuraTherm 2011208 and is the answer not in the manual?
General| Brand | Dinex |
|---|---|
| Model | DuraTherm 2011208 |
| Category | Battery Charger |
| Language | English |
Safety caution regarding improper use, potential injury or damage.
Warning that installation must be done by qualified personnel.
Identifies a symbol indicating hazardous situations causing machine damage or operator injury.
Instructions to mitigate risks of fire, electric shock, or injury.
Warning against modifying the plug, which creates a hazard and voids warranty.
Owner/installer responsibility for compliance with electrical codes; Dinex not liable for damages from non-compliance.
Caution against self-service; service must be by authorized agents.
Warning that non-compliant installation voids the product warranty.
Requirement for dedicated circuits for each charger to prevent issues with heavy draw devices.
Note that voltage fluctuations can impact heating duration.
Indicates three beeps signal removal of a base before full charge completion.
Charger prevents overheating by requiring cooling time before reheating a base; "Reheat Later" message indicates insufficient cooling.
Warning of low voltage affecting performance; user can continue by pressing SELECT.
Safety parts replacement must use original factory parts and be done by authorized technicians.
Error code for high incoming voltage, indicating potential faults and need for maintenance verification.
Error for RFID communication issues, suggesting base or charger faults, with specific troubleshooting steps.
Error for incompatible base, indicating excessive current draw or non-Dinex base/charger issue.
Error for unit overheating, pointing to fan issues, airflow obstruction, or ambient temperature, advising checks and service.
Critical error indicating service is required due to inverter fault; advises unplugging and replugging, then contacting service.
Error for incoming voltage issues, suggesting poor power quality or electronics fault; advises maintenance check.
Instructions for cleaning the DuraTherm charger, including precautions against water and abrasives.
Guidance on inspecting, cleaning, and replacing grease and air filters for proper unit function.
Safety warning for cleaning; unplugging is mandatory, avoid excessive water, do not use if top is damaged.
Standard warranty terms covering defects in material/workmanship under normal use, conforming to specifications, including parts and labor for end-users.
Warranty for Dinex licensed software, covering the right to license/sublicense software per standard terms.
Warranty for supplies and accessories shipped with products is covered by a separate statement available online.
Warranty for services provided by Dinex, ensuring they are performed by trained individuals professionally.
Warranty duration is one year, starting from the shipment date of the Warranted Products to the Customer.
Remedies for warranty claims include repair or replacement of products/software, with specific service hours and rates.
Customer's exclusive remedy for services is re-performance; remedies are exclusive and Dinex's sole liability for warranty claims.
Warranties are exclusive, superseding all others, with no implied warranties or modifications by representatives.
Standard warranties apply only to US/Canada purchasers; international sales have specific commercial terms, and no warranty is made without express written agreement.
Warranties exclude claims from normal wear, shipping damage, improper installation/repair, and use with unauthorized software/hardware.
