Dingo Pet Co. Whelping Box Assembly Instructions 7
Step 9 - Add 8 x Angle Brackets (K) to DingoSafe Rail (G) using supplied
screws and nuts (L). Ensure that the vertical part of the bracket meets the
longest side of the rail
Step 10 - Mount the Rails with Brackets now attached (K-G) to the Panels
that are already installed to the posts. Use screws and nuts (L) to do this.
Ensure that the dome nuts are on the opposite side of the panel to the
bracket. Note that one of the rails has a notch cut out of it to accommodate
the post that sits between the two short panels.
To Next Page
Loading...
Need help?
General