Dingo Pet Co. Whelping Box Assembly Instructions 9
PART B - The Enclosure
Step 12 - Stand 1 x Posts (A) In position on the Whelping Pads where the
enclosure section of the Whelping Box will be.
Add 1 x Picket Rail (I) to Posts (A), by sliding the Picket Rails into the Posts.
Ensure openings in the Picket Rail are facing up.
Step 13 - Add Pickets (H) to Picket Rail already installed (I) by firmly
pushing pickets into the openings in the picket rails.