7
...
i
USER_MAN_ENG_DFWIECEX
MAINS POWER SUPPLY
BATTERY POWER
The indicator is provided with an external power supply. Refer to the dedicated manual for installation and warnings.
Current safety regulations must be observed, including the use of a "clean" line free from interference and disturbance caused by
other electronic equipment.
The message
LoW.bAtt
anticipates the automatic switch-o of the instrument.
Internal battery level indication
Battery charging indication
Charged battery
Low battery
General characteristics of the scale
If a weight of less than 10% of the capacity is present on the scale when it is switched on, it is automatically reset to zero.
This function is useful for automatically zeroing a container, pallet or small structure, without having to recalibrate the scale.
The indicator keypad can be deactivated to avoid accidentally executing available functions.
AUTOMATIC ZEROING WHEN THE SCALE IS SWITCHED ON
KEYPAD LOCK
Automatic zeroing when the scale is switched on is an advanced configuration.
The keypad lock provides an advanced configuration.
Weights greater than 10% can be reset by adjusting the source calibration.
Automatic zeroing can be deactivated when the scale is switched on.
To Next Page
