Dini Argeo LTP Operating Instructions

Optimized layout for A4 print.
4
LTP_05_23.03_EN_U
Dear Customer,
Thank you for purchasing a DINI ARGEO product.
This manual explains the usage of the hydraulic weighing system for forklifts.
In particular, all the functions of the electronic part of the scale are described to assist the forklift driver during use.
For any additional information or specific requests, please contact your local dealer.
is publication is optimised for A4 printing.
Introduction
• The weighing system does not change the safety regulations normally applied to the forklift.
• Before weighing, make sure that the forklift is stationary, on a flat surface and that there are no people in the area around the load.
• The employee training on the use of the system is the purchaser’s responsibility.
• Please read this manual carefully before using the system.
• Assistance must only be carried out by personnel authorised by Dini Argeo.
• Dini Argeo is not responsible for any weighing errors resulting from improper use of the system.
Warnings

Dini Argeo LTP Specifications

General

Brand	Dini Argeo
Model	LTP
Category	Accessories
Language	English