Need help?Do you have a question about the Dini Argeo 3590EKR Series and is the answer not in the manual?
General| Type | Weight indicator |
|---|---|
| Series | 3590EKR |
| Brand | Dini Argeo |
| Operating temperature | -10°C to +40°C |
| Serial ports | 2 RS232 |
Details power requirements and connection for different models and battery charging.
Describes the instrument start-up sequence and initial display messages.
Describes the functionality of each key on the indicator's front panel.
Lists and explains error messages displayed by the instrument during operation.
Explains how to weigh individual axles and calculate the total vehicle weight.
Details the configuration and weighing procedure for manual axle weighing.
Describes the configuration and weighing process for automatic static axle weighing.
Explains the configuration and weighing procedure for automatic dynamic axle weighing.
Details weighing with input and output functions to determine weight differences.
Explains manual input/output axle weighing configuration and procedure.
Details automatic static input/output axle weighing configuration and procedure.
Explains automatic dynamic input/output axle weighing configuration and procedure.
Explains how to calculate the truck's net weight using preset tare values.
Covers various functions within the automatic axle weighing cycle.
Lists and explains error messages during automatic axle weight acquisition.
Details how to add an extra tare value for loaded/unloaded weight calculations.
Explains how to link print formats to specific print functions.
Explains how to configure set points for outputs based on weight conditions.
To Next Page
