Need help?Do you have a question about the Dini Argeo 3590ET8 and is the answer not in the manual?
General| Category | Accessories |
|---|---|
| A/D Converter | 24-bit |
| Display | LCD |
| Serial Ports | 2 x RS232 |
| Protocols | Modbus RTU |
| Approval | CE |
Important warnings for user safety and instrument care.
Information on compatible internal and external modules.
Explains symbols and texts used in the manual and on the instrument.
Details on powering the instrument via mains or battery.
Step-by-step guide to turning on the instrument.
Procedures for safely shutting down the instrument.
Detailed explanation of each key's function.
Explains how to access secondary functions using the 2ndF key.
Guide to entering text, numbers, and symbols via the keyboard.
How to lock or unlock the keyboard to prevent accidental key presses.
Accessing a menu showing key functions and status.
Using an external PC keyboard to control the indicator.
Details on operating the 19-key infrared remote control.
Details on operating the 6-key radio remote control.
Function to increase the size of weight digits for better readability.
Explains LED indicators and LCD symbols for status monitoring.
How the indicator displays battery charge level.
How data is presented on the display under different conditions.
Customizing the LCD display layout on 3590E models.
Error messages encountered during setup, menu navigation, or startup.
Error messages encountered during the weighing process.
How to set the scale to zero.
Entering manual tare values.
Using the calculator for manual tare operations.
How to remove a stored tare value.
Managing tare lock status.
How to limit tare functions for approved instruments.
Selecting tare execution modes or disabling tare operations.
Storing preset tare values associated with vehicles.
How multi-range and multi-division scales work.
Viewing configuration metric data like capacities and divisions.
How to use configurable input texts for data entry.
Managing customer records in the database.
Managing material records in the database.
Managing vehicle records in the database.
Setting and using passwords for database access.
General overview of the weighing system and its capabilities.
Performing simple axle weighing without input/output function.
Step-by-step guide for manual axle weighing.
Performing automatic static axle weighing.
Performing automatic dynamic axle weighing.
Procedures for input and output axle weighing.
Manual axle weighing with input/output functionality.
Automatic static axle weighing with input/output.
Automatic dynamic axle weighing with input/output.
How to cancel an automatic axle weighing cycle.
Error messages during automatic axle weight acquisition.
Resetting errors for specific axles in dynamic weighing.
Using external inputs to control weighing cycle start/end.
Enabling and managing output functions for driver guidance.
Pausing axle computation during weighing.
Configuring axles to be excluded from totalization.
Adding an extra tare value for calculations.
Procedures to re-enable weighing after certain conditions.
Setting weight limits for acceptable operations.
Viewing and clearing accumulated totals.
Managing progressive counters for tickets and lots.
Associating print formats with specific print functions.
Efficiently linking formats to print functions.
Setting the number of copies for printouts.
Repeating the most recent print job.
Enabling default printing formats.
Enabling peripheral diagnostics.
Diagnosing serial communication data.
Using the built-in calculator function.
Accessing help for the calculator function.
Viewing net weight with increased sensitivity.
Setting the instrument's date and time.
Configuring set-point functions for outputs.
Statement of compliance with European regulations.
Details of the instrument's warranty terms.
To Next Page