Dini Argeo DGTQ User Manual

TECHNICAL MANUAL
WEIGHT INDICATORS
DGT: INDICATOR, REPEATER, TRANSMITTER OF WEIGHT
Indicators for bench or panel applications.
DGT_07.08_18.01_EN_T

Dini Argeo DGTQ Specifications

General

Brand	Dini Argeo
Model	DGTQ
Category	Accessories
Language	English

Summary

1. Requirements for Optimal Installation

1.1 Electrical Precautionary Measures

Details essential electrical precautions for safe and reliable operation of the indicator.

1.2 Earthing System

Explains the proper grounding procedures for the indicator and connected components.

3. Connection to the Load Receiver

5. Calibration

5.1 Calibration Procedure for Independent Channels and "TRANSM" Modes

Procedure for calibrating scales with independent channels or TRANSM functioning.

5.2 Calibration Procedure for Dependent Channels Mode

Calibration for dependent channels, including digital equalization options.

5.3 Zone of Use Different from Calibration Zone

Procedure for adjusting calibration due to different gravity zones.

5.5 Theoretical Calibration

Calibration procedure when a sample weight is not available.

5.6 Manual Calibration of a Defined Weight

Manual recalibration of a specific weight point without zero.

6. Display of Gravity Acceleration and Weighing Error Correction

7. Serial Outputs

7.1 RS485 and COM1 Serial Port

Details of the RS485 and COM1 serial ports for data transmission.

7.2 RS232 or COM2 Serial Port

Information on the RS232 and COM2 serial ports for data communication.

7.3 PROFIBUS Port

9. Master/Slave and Repeater Modes Configurations

9.1 Repeaters

9.2 Master/Slave

13. Error Messages

14. Connection Schemes