Need help?Do you have a question about the Dini Argeo DGT60 and is the answer not in the manual?
General| Capacity | 60 kg |
|---|---|
| Load cell excitation voltage | 5 VDC |
| Sampling rate | 80 Hz |
| Protection rating | IP54 |
| Description | Weight indicator for industrial applications |
| Serial Ports | RS232 |
| A/D converter | 24-bit sigma-delta |
| Operating temperature | -10 / +40 °C |
Details electrical safety measures and precautions for instrument installation.
Explains the proper earthing system for optimal functioning and safety.
Describes the available serial communication ports for data output.
Lists and describes the instrument's input and output capabilities.
Details the connection procedure for DGT1 and DGT1S models to load receivers.
Explains the connection process for DGT4, DGT20, DGT60, and DGT100 models.
Outlines the connection procedure specific to the DGTQ model.
Details the connection instructions for DGTP and DGTPK models.
Step-by-step guide for calibrating independent channels and TRANSM modes.
Procedure for calibrating dependent channels, including digital equalization.
Details the RS485 and COM1 serial port configurations and uses.
Describes the RS232 and COM2 serial port functionalities.
Configuration and connection for the PROFIBUS port.
Configuration for repeater modes.
Configuration for Master/Slave operation modes.
To Next Page