Dini Argeo DGTQAN User Manual

TECHNICAL MANUAL
WEIGHT INDICATORS
DGT: INDICATOR, REPEATER, TRANSMITTER OF WEIGHT
Indicators for bench or panel applications.
DGT_07.08_18.01_EN_T

Dini Argeo DGTQAN Specifications

General

Brand	Dini Argeo
Model	DGTQAN
Category	Accessories
Language	English

Summary

Technical Manual Weight Indicators Overview

DGT: Indicator, Repeater, Transmitter of Weight

Overview of DGT series indicators functioning as indicators, repeaters, and transmitters.

Installation Requirements and Specifications

1. Requirements for an Optimal Installation

Guidelines for optimal placement and environmental conditions for the indicator.

1.1 Electrical Precautionary Measures

1.2 Earthing System

Connections and Serial Communication

7. Serial Outputs

7.1 RS485 ... Serial Port

Configuration and usage of RS485 and COM1 serial ports.

7.2 RS232 or COM2 Serial Port

7.3 PROFIBUS PORT

Setup, Configuration, and Calibration

5. Calibration

Procedures for scale calibration, including independent and dependent channels.

5.1 Calibration procedure for the INDEPENDENT CHANNELS and "TRANSM" modes

Step-by-step calibration for independent and TRANSM modes.

5.2 Calibration procedure for DEPENDENT CHANNELS MODE

Calibration for dependent channels with digital equalization.

10. Analogue Output (Optional, Available Depending on the Model)

Configuring the optional analogue output.

11. Programming the Printouts

Configuring printer output settings and layouts.

11.2 Saving the Label in the Labeller’s Permanent Memory

12. Printing the Heading

Connection Schemes and Troubleshooting

13. Error Messages

List and descriptions of common error messages encountered.