EasyManua.ls Logo

Dini Argeo DGTPAN User Manual

Dini Argeo DGTPAN
109 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
TECHNICAL MANUAL
WEIGHT INDICATORS
DGT: INDICATOR, REPEATER, TRANSMITTER OF WEIGHT
Indicators for bench or panel applications.
DGT_07.08_18.01_EN_T

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Dini Argeo DGTPAN and is the answer not in the manual?

Dini Argeo DGTPAN Specifications

General IconGeneral
BrandDini Argeo
ModelDGTPAN
CategoryAccessories
LanguageEnglish

Summary

DGT: Indicator, Repeater, Transmitter of Weight

1. Requirements for Optimal Installation

1.1 Electrical Precautionary Measures

Crucial electrical safety measures and guidelines for installing the weight indicator.

1.2 Earthing System

Procedures for correct earthing to ensure system stability and safety.

3. Connection to the Load Receiver

3.1 DGT1/DGT1S Model Connection

Specific connection details for DGT1 and DGT1S models.

3.2 DGT4, DGT20, DGT60 and DGT100 Models Connection

Connection guidelines for DGT4, DGT20, DGT60, and DGT100 models.

4. Setup Environment

4.2 Description of the Steps

Detailed explanation of each parameter and function within the setup environment.

5. Calibration

5.1 Calibration Procedure for Independent Channels and "Transm" Modes

Step-by-step guide for calibrating scales with independent channels or transmission mode.

5.2 Calibration Procedure for Dependent Channels Mode

Process for calibrating scales with dependent channels, including digital equalization.

7. Serial Outputs

7.1 RS485 / COM1 Serial Port

Details on connecting and configuring RS485 or COM1 serial ports.

7.2 RS232 or COM2 Serial Port

Configuration and usage of RS232 or COM2 serial ports.

8. Remote Scale Configuration

9. Master/Slave and Repeater Modes Configurations

9.1 Repeaters

Configuration for repeater protocols.

9.2 Master/Slave

10. Analogue Output (Optional, Available Depending on the Model)

11. Programming the Printouts

13. Error Messages

14. Connection Schemes

Related product manuals