Need help?Do you have a question about the DiniTech NRGkick Series and is the answer not in the manual?
General| Model | NRGkick |
|---|---|
| Category | Automobile Accessories |
| Charging Standard | Type 2 |
| Charging Mode | Mode 3 |
| Charging Power | Up to 22 kW |
| Amperage | Up to 32 A |
| Connectivity | Bluetooth, Wi-Fi |
| Protection | IP67 |
| Voltage | 230 V / 400 V |
| Compatibility | All electric vehicles with Type 2 connector |
The NRGkick charging unit consists of the charging cable with the vehicle connector, the electronics in a plastic housing.
Connect the grid connector to the power supply. Then connect the vehicle connector to the vehicle.
Press the selection button for 4 seconds to interrupt the charging process and re-initialize the unit.
Stop the charging process normally on the vehicle, then unlock and unplug the vehicle connector.
Connect the power grid connector to the grid, then connect the vehicle connector to the vehicle.
The NRGkick is protected against theft and tampering, with features like vehicle lock integration.
Errors are indicated by specific sequences of flashing LEDs on the NRGkick unit.
Includes charging electronics, residual current protection, energy meter, and Bluetooth LE interface.
Connect the unit to power, open the NRGkick App, and tap the icon to connect via Bluetooth.
Understand LED signals for parameter transfer and access code management.
To Next Page
