EasyManua.ls Logo

Diono Radian 3 RX - User Manual

Diono Radian 3 RX
39 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
READ INSTRUCTION MANUAL
before using this child restraint
radian
®
3 RX
car seat
Instruction Manual
from birth up to 120 lbs
All-in-one convertible
Question and Answer IconNeed help?

Do you have a question about the Diono Radian 3 RX and is the answer not in the manual?

Summary

Safe Use Specifications

Rear-Facing Weight and Height Limits

Specifies limits for rear-facing use: 5-45 lbs, 44 inches or less.

Forward-Facing Weight and Height Limits

Specifies limits for forward-facing use: 20-65 lbs, 57 inches or less.

Booster Mode Weight and Height Limits

Specifies limits for booster mode use: 50-120 lbs, 57 inches or less.

Safe Use Checklist and Warnings

Proper Car Seat Installation Checks

Details how to ensure tight installation and secure harness fit.

Frontal Airbag Safety Warning

Warns against placing the restraint rear-facing with an active front airbag.

Critical Safety Warnings

Installation and Use Prohibitions

Lists forbidden installation methods and usage restrictions (e.g., side-facing, unsecured).

Product Integrity and Modifications

Warns against using damaged seats, unapproved accessories, or modifying the restraint.

Product Integrity and Safe Practices

Expiration and Damage Policy

States the restraint is unusable if damaged, expired, or missing parts.

Correct Child Restraint Installation

Airbag Prohibitions for Rear-Facing

Reiterates the warning against rear-facing installation with active front airbags.

Proper Harness Securing Techniques

Details how to adjust harness straps snugly and securely for the child.

Top Tether Installation and Use

Initial Setup and Harness Adjustment

Forward-Facing Harness Positioning

Rear-Facing Installation Methods

Rear-Facing LATCH Installation

Instructions for installing the car seat rear-facing using the LATCH system.

Rear-Facing Seat Belt Installation

Instructions for installing the car seat rear-facing using the vehicle's lap/shoulder belt.

Rear-Facing LATCH Installation Steps

Advanced Rear-Facing LATCH Procedures

Tightening and Testing LATCH Installation

Covers tightening the LATCH strap and testing for a secure installation.

Rear-Facing Seat Belt Installation

Tightening and Testing Seat Belt Fit

Explains how to tighten the seat belt and test the installation's tightness.

Rear-Facing Lap Belt Installation

Testing Lap Belt Installation Tightness

Covers tightening the lap belt and testing the installation's security.

Forward-Facing Installation Overview

Forward-Facing LATCH Installation

Forward-Facing LATCH and Tether Setup

Forward-Facing LATCH Installation Steps

Securing LATCH Connectors and Straps

Covers attaching LATCH connectors, tightening straps, and testing for tightness.

Forward-Facing Seat Belt Installation

Forward-Facing Seat Belt Tightening and Testing

Testing Forward-Facing Seat Belt Tightness

Explains how to test the tightness of the seat belt installation.

Forward-Facing Lap Belt Installation

Forward-Facing Lap Belt Tightening and Testing

Testing Forward-Facing Lap Belt Tightness

Explains how to test the tightness of the lap belt installation.

Booster Mode Installation

Booster Mode Weight and Belt Requirements

Specifies weight limits and mandates using lap and shoulder belts for booster mode.

Securing Your Child

Harness Adjustment and Securing

Belt Locking Clip and Safe Stop Usage

Harness Strap Removal and Replacement

Diono Radian 3 RX Specifications

General IconGeneral
Weight Capacity5-120 lbs
Rear-Facing Weight Limit5-50 lbs
Forward-Facing Weight Limit22-65 lbs
Booster Mode Weight Limit40-120 lbs
Maximum Height Recommendation57 inches
Harness Type5-point
Height Limit (Rear-Facing)44 inches
Recline Positions3
FoldingYes
Installation TypeLATCH or seat belt
MaterialSteel and energy-absorbing foam
Safety FeaturesSide-impact protection, energy-absorbing foam
Car Seat TypeConvertible

Related product manuals