Directed Electronics PKALL User Manual

Connect wire to vehicle
Branchement du filage au véhicule
INPUT
ENTRÉE
OUTPUT
SORTIE
Connect wire to Remote-Starter/Alarm
Branchement du filage au démarreur à distance/Alarme
P.1
INSTALLATION WITH D2D
INSTALLATION AVEC D2D
INSTALLATION WITHOUT D2D
INSTALLATION SANS D2D
1
2
Programming
button
Port
D2D
Starter or alarm
Démarreur ou alarme
2
1
Programming
button
Starter or alarm
without D2D
Démarreur ou alarme
sans D2D
conn.
D2D Cable
Pin 1 Red or Blue* (+)12V
Pin 3 Black Ground
CUT
1
2
4
3
Cut off one plug of the D2D connector, connect
the Pin 1 Red or Blue* wire to +12V and the Pin 3
Black wire to ground.
*Wire colors may vary on the kit you have
purchased.
Coupez les 4 fils à l'extrémité de l'un des deux
connecteurs D2D. Connectez le fil Rouge ou Bleu*
au 12V et le fil Noir à la masse du véhicule.
*La couleur des fils peut varier selon le kit.
Pin 1
Pin 3
PUSH TO START
LEXUS GX460 2010-2011
SMART KEY
ADDENDUM - SUGGESTED WIRING CONFIGURATION | SCHÉMA DE BRANCHEMENT SUGGÉRÉ
WIRING SCHEMATIC CONFIGURATION | SCHÉMA DE BRANCHEMENT
PKALL VERSION 2.4.0 OR HIGHER | VERSION 2.4.0 ET PLUS
PKALL
www.xpresskit.com
Rev.: 20110830
© 2011 Directed Electronics. All rights reserved.
Copyright © 2010,
Fortin Auto Radio Inc
IMI White
IMO LightBlue
Copyright © 2010,
Fortin Auto Radio Inc
+12V Battery Black
Copyright © 2010,
Fortin Auto Radio Inc
(+) Start Black
(+) Ignition2 Blue
(+) Accessory Red
OBDII
At Parking Light harness
Au harnais des lumières
de stationnement
(-) Parking Lights Red
Copyright © 2010,
Fortin Auto Radio Inc
Copyright © 2010,
Fortin Auto Radio Inc
Copyright © 2010,
Fortin Auto Radio Inc
Behind Glove box
Derrière le coffre à gant
(+) FoothBrake Purple

Directed Electronics PKALL Specifications

General

Brand	Directed Electronics
Model	PKALL
Category	Marine Radio
Language	English

Summary

LEXUS GX460 PKALL Wiring Schematic

PKALL Version 2.4.0+ Wiring Overview

Detailed wiring diagram for PKALL version 2.4.0 and higher, showing connection points.

D2D vs. Non-D2D Installation Wiring

Wiring configurations for D2D and non-D2D PKALL module installations, including cable connections.

PKALL Module Wiring and ECM Connections

ECM Back View Wiring Diagram

Illustrates connections to the ECM via its back view connector, detailing wire colors.

Module Front View and Relay Wiring

Shows module front view connections and associated relay wiring for system integration.

Vehicle Interface Wiring for PKALL

Key Vehicle Component Connections

Connects PKALL to ignition, start, accessory, and lighting systems via specific vehicle points.

Fuse, OBD-II, and Kick Panel Wiring

Details fuse requirements, OBD-II connector, and driver kick panel connections for installation.

PKALL Installation, Programming, and Operation

PKALL Module Connection Procedures

Step-by-step guide to connect the PKALL module to the vehicle's wiring harnesses.

Module Programming and Vehicle Start

Instructions for programming the PKALL module and starting the vehicle remotely.

Usage Modes and Safety Warnings

Explains driving modes and provides important safety warnings and technical support information.